Floor Sanding Dublin

Category: Floor Cleaning and Polishing Category: Floor Cleaning and Polishing

Address: Ashleigh House JFK Road, Dublin, Dublin 12, Clondalkin, Dublin, County Dublin, d12

Landline: 01 430 4313 Landline: 01 430 4313
Landline: 01 444 0146 Landline: 01 444 0146

 Website: dublin-floorsanding.ie
 Website: Visit Website
 Message now

Report a problem with this listing

Business Profile

Floor Sanding Dublin Floor Sanding Dublin

Turn To Expert Floor Sanding Dublin Services For Your Establishment

Getting the perfect wood floor for your establishment cost you a fortune. It was worth it. After all, it enhances the elegance of the premises, and brings beauty, sophistication and a natural look and feel to the establishment. However, constant human traffic causes its finishing to wear down. Scratches and scuff marks caused by footwear such as heeled and spiked shoes make it unsightly and ruin the décor of the premises. In addition, dust and dirt get grinded against the surface, contributing to the abrasion of the polish. A common complaint among homeowners with dogs or cats is the claw marks that they leave behind on the wood. You don't want to watch your investment go down the drain. Get it refinished as part of your maintenance efforts. The first step in the process will be to remove the existing finishing that is losing its effectiveness and sheen. That's a job for the floor sanding experts.

Floor sanding is one of the most labour intensive jobs in any home improvement project. It entails breaking down the tough compounds on the surface of the wood, which have been purposefully designed to resist any form of pressure and damage. You could spend an entire week just working through a couple of rooms in your home. Then there is the risks involved, from under-sanding the wood- which leaves streaks of previous finishing all over- to not following the grit sequence- in which case you end up with scratch and cut marks on the wood surface. The outcome of the sanding process has a direct impact on effectiveness of the treatments that will be applied. For instance, raised fibres across the wood grain will prevent you from applying the wood stain or polish evenly, while scratches left on the surface will not be hidden by wood stain or sealants you apply. You don't want to be forced to redo the whole refinishing process. It will consume more of your time and resources- not to mention the level of frustration and mental fatigue involved. Avoid any problems by letting our professional floor sanding team to take over from you.

What You Can Expect From Our Floor Sanding Specialists

1. High quality equipment

Our floor sanding team comes with equipment specially designed to get through the tough layers of protection on the wood surface. They sand down the finishing and eliminate the dents and scratches, leaving you with the bare, original wood. It will be ready for the treatment process, and the opened-up pores will easily absorb the wood stain and sealants to be applied. This will enable you to be satisfied with the overall outcome of your floor refinishing process. In addition, you won't have to worry about dust getting raised into the air and covering up the items in your household. The dustless floor sanding system our team employs collects the sanding as soon as it is formed, using a powerful suction system. This means that your shelves, furnishings, wardrobes, fragile artwork and even the heating, ventilation and air conditioning system are all safe. You won't need to do a clean up after we're done, enabling you to proceeding with your floor refinishing process as planned.

2. Domestic and commercial floor sanding

Our floor sanding services cut across the scope- from townhouses and apartments, to nursing homes, cafes and restaurants, schools and public libraries, all through to health care centres and even government institutions.

3. Skilled floor sanding services for all floor types

You want your floor maintenance needs to be handled by professionals who have had years of experience. That's what our team comes with. The floor sanding personnel has the training and expertise necessary to work on the unique type of flooring in your premises, from chestnut and oak all through to teak and mahogany.

4. Green practices

We use eco-friendly floor sanding techniques to revitalise your surface. Our team will eliminate those scratches, scuff marks and dents, and get rid of the old and worn out finishing, without harming the biodiversity around you. The equipment and processes involved are safe for Mother Nature.

5. Quality services at budget friendly costs

You get the exceptional floor sanding results without denting your wallet. The costs are affordable, and factor in issues in your particular situation, including the size of the area to be sanded, and the type of wood flooring.


Floor Sanding Dublin - Professional floor sanding services for less!

3 DIY Floor Sanding Horror Stories That You Need To Hear 3 DIY Floor Sanding Horror Stories That You Need To Hear

Every professional in the floor sanding and restoration business can and will tell you that DIY floor sanding is never a good idea. Some will tell you about the dangers to your body. Others will point out the risk of doing more harm than good to your floor. Whatever the case, it is one of those home restoration projects that is best left to the professionals.

Despite there being so many warnings against DIY floor restoration, there are still very many people who try it themselves. For the most part, all they have to deal with is substandard results that require redoing. However, there are a few home owners every now and then who experience real life nightmares as a result of taking matters into their own hands. Below are 3 real life scenarios that illustrate this. These scenarios are very common and we shall therefore not be naming names or specifying locations. All you need to know is that it could very easily happen to you.

1. The swirls, scratches and sanding flaws fiesta
This one is without a doubt as bad as it gets when it comes to DIY floor sanding. In this case, the home owner either applied the wrong grit size while sanding or applied too much pressure. Suffice to say the floor didn't take it too well and what was left was a series of scratch marks and unsightly swirls all over the wooden floor panels, This incredibly poor quality of work required fixing and finishing by professionals which made the entire DIY excursion a complete waste of time, energy and resources.

2. Moved back in too soon
This is not a very common one but has happened to quite a few DIY enthusiasts. In this case, everything went on fairly well until it came to the refinishing step. The home owner did not wait the correct amount of time and ended up moving furniture back in before the floor polish had settled and dried. What were left were odd imprints, surface blebs and areas where the polish had been drugged clean off the surface of the wooden floor. This is common as most homeowners are not well versed enough with floor polishes to understand how much time to give the product to dry.

3. More harm done than good
Finally, this happened to a homeowner who thought they were giving their floor a makeover but instead ended up screwing up the entire setup. They made the mistake of using the wrong sand grit on delicate soft wood panels. The coarse grains caused more than simple scratch marks and swirls resulting in the homeowner having to get a few of the panels replaced.

Final verdict
With all that could and obviously has in the past gone wrong, working with a professional crew is without a doubt the best idea. In addition to sparing yourself and your floor the trouble of a job not so well done, you get to go about your business saving both time and energy. So learn from the mistakes of these home owners, hang up your DIY kit and just leave it to the experts.

Floor Sanding Dublin

5 Things That Could Go Horribly Wrong With DIY Floor Sanding 5 Things That Could Go Horribly Wrong With DIY Floor Sanding

DIY home restoration can be a lot of fun. Whether it is painting your own walls or fixing creaky old doors, there is something exhilerating about that feeling of fulfilment after you complete a task. However, there are a few home improvement tasks that are truly best left to the professionals. One of these is wooden floor repair and restoration. DIY floor restoration can and will go horribly wrong if you do not know what you are doing. Things could go wrong anywhere from the simple removal of furniture to the actual sanding. Below are a few of the most common dangers of doing it yourself that should help you see why a professional crew is the best way to go.

1. Personal injury
DIY dustless floor sanding is all fun and games until someone gets injured. It could be anything from a simple encounter with rogue debris to serious injuries from improper handling of floor sanders. The reason for this is usually the fact that you as the home owner and DIY enthusiast are not adequately skilled, experienced and sometimes equipped to handle the task.

2. Damage to wood floor panels
In addition to injuring yourself you could also end up injuring the floor if you choose to do the sanding yourself. This is something that can happen to anyone including professionals. However, the risk of doing more harm than good increases significantly among rookies and dustless floor sanding newbies. Damage can be in different forms including scratch marks on the wood and even damage to exposed nails.

3. Asthma attacks and other allergic reactions
Even with dustless floor sanding, there is always the risk of respiratory reactions if proper care is not taken. This is common with DIY floor restoration projects. It is especially common when it comes to dealing with water damage where there is wood rot and fungal colonies to deal with. In this case, failure to get professional help could cost you in terms of your health.

4. Uneven sanding with poor final results
Lack of training and expertise will also show in your final results. One of the most common signs of this is uneven sanding. In this case, you could have funny swirls and scratch marks as a result of improper sanding. You could also have unsightly blebs and debris trapped inside the finishing coats. Whatever the case, you are not likely to achieve professional quality results should you choose to work on your floor alone.

5. A total waste of time, energy and resources
Finally, DIY floor restoration could end up being a total waste of time and energy for you. With all the other dangers and pitfalls highlighted above, chances are that you will end up having to get a professional to redo or finish the job.

Bottom line
It goes without saying that DIY floor sanding is not a good idea. With this and so much more that could go wrong, you are far better off getting professional help. It especially becomes a nightmare when you have to call in professionals to fix any mess you make in addition to the actual restoration. In a nutshell, spare yourself the energy, stress and money and just work with a great crew.

Floor Sanding Dublin

5 Things You Should Never Compromise On When Working With Floor Sanding Professionals 5 Things You Should Never Compromise On When Working With Floor Sanding Professionals

1. High quality results

One of the most important things you need to remember when hiring a professional crew to work on your floors is the fact that it is an investment. You should therefore ensure that you do not settle for anything short of full value for your money. In this case, high quality results are non-negotiable. It could be in the form of anything from proper sanding to getting the wood stain just right. Whatever the case, it is important to ensure that you emphasize to the crew just how important great quality results are to you.

2. Timely completion of the project

Something else you should never compromise on when it comes to working with professionals is the importance of sticking to the schedule. If you choose your crew properly, this is not something you should have to worry about. However, it is still something very important to insist on. This is important whether it is dustless floor sanding being done in your bathroom floors or full restoration in your office building. The last thing you want is to have your life and operations paralysed as you wait for a crew to get its act together and deliver the services as promised. One of the best ways to ensure that the schedule is adhered to is by being present. That way, there will be no questionable delays and unnecessary postponing holding you captive.

3. Respect for personal space and property

It is also very important for you as the home owner to insist on absolute respect for personal space and property. This is the case especially when the crew is working in a residential property. The last thing you want is to have strangers wandering all over your house or damaging your property as they work on your floor. As with the time management challenge, your presence will go a long way towards ensuring that bounderies are respected and professionalism prevails.

4. Consideration of your preferences and priorities

You should also never every compromise on your vision for your floor when it comes to restoration projects. Whether it is the shade of the wood stain or the glossiness of the polish, the crew should be able to deliver in a satisfactory manner. One of the best ways to do this is to ensure that you make your priorities and preferences very clear at the beginning of the project. This ensures that the crew knows exactly what it is you want. It is also very important in this case to not only ask questions but also vocalise any concerns you might have. Do not shy away from this because after all is said and done, it is you who will have to literally live with the final results.

5. Full value for your money

Finally, you should never compromise when it comes to getting full value for your money. This combines everything from high quality results and professional conduct to time management. It is not just important to focus on one of the 4 factors mentioned above. You need to ensure that the crew adheres to all four of these requirements. It is truly the only way to ensure that your investment pays off fully.

Floor Sanding Dublin

7 Frequently Asked Questions In Dustless Floor Sanding 7 Frequently Asked Questions In Dustless Floor Sanding

Dustless floor sanding is slowly but very surely gaining popularity in the floor restoration business. It makes the crews work easier and your life a lot easier by extension. As a home owner it is very important for you to understand the process. This will ensure that you not only get the most out of this technique but that you also know exactly what to expect. To make your work easier, below are answers to 8 of the most commonly asked questions regarding dustless floor sanding. By the end, you should be a sort of an expert and in a great position to ensure that you get full value for your money.

1. How is dustless floor sanding done?
Dustless floor sanding involves suction of dust, wood shavings and other forms of debris while sanding a wooden floor. This is done by special floor sanders with inbuilt suction and storage systems. Some even contain air filters that suction dirt from the air immediately surrounding the machine to ensure that very little if any dirt gets away.

2. Is there need to clear the room with dustless floor sanding projects?
The answer to this question is yes. It is very important to ensure that the room is clear when sanding. This is the case even with dustless floor sanding where there is very little of a mess to worry about. In addition to having rogue debris to worry about, having furniture and home accessories lying around will make the crew's work more difficult than it needs to be.

3. Is dustless floor sanding completely dust free?
No it is not. There is yet to be a machine invented that guarantees that absolutely all the dust and debris produced is collected and stored. For now, you still have a small mess to think about. However, it is significantly less than what you have to deal with when it comes to ordinary floor sanding.

4. Does dustless floor sanding cost extra money compared to ordinary floor sanding?
This depends on the company that you choose to work with. The availability of the required equipment makes it a relatively affordable service. This means that for the most part, you will not have to pay extra. However, it is important to consult your professional crew on their terms and offers.

5. How often should dustless floor sanding be done on a wooden floor?
As with any other floor restoration practise, dustless floor sanding should be done every 5 to 15 years. This also depends a lot on the type of wood and more importantly on the finishing product used during the restoration.

6. Is dustless floor sanding as effective as ordinary floor sanding?
Yes it is. In fact, the fact that it reduces the mess you have to deal with makes it a whole lot more effective and efficient.

7. Is dustless floor sanding safe for asthmatics?
It is not only safe but also recommended for people with respiratory allergies. This is because of the reduced air pollution effect within the house.

Conclusion
With the answers to these 7 FAQs, it is safe to say that you basically understand what dustless floor sanding is. In order to ensure that you get the very best results, it is important to ensure that you work with a crew that knows exactly what they are doing. This will save you and your floor a lot of trouble. In a nutshell, the dustless floor sanding technique has a lot to offer and is definitely worth considering if you are planning on giving your wooden floors a makeover.

Floor sanding Dublin

Gallery

0 Reviews

Leave a review